Filter Options
Required*
Filter
Houston / Texas / United States
0.0
Cameron International Corporation is one of the global providers of pressure control, processing, flow control and compression systems as well as project management and aftermarket services for the oil, gas and process industries. Cameron International Corporation manufactures pressure control equipment and provides aftermarket services for onshore, offshore and subsea oil & gas drilling and production operations throughout the world. The company is headquartered in Houston where it employs nearly 8,000 people and is publicly owned.
Houston / Texas / United States
0.0
Watson Grinding and Manufacturing is a full-service coating, machining and grinding shop that offers a variety of coating services. The company uses various equipment, including manual engine lathes, tool and cutter grinders, milling and lapping machines, radial arm drills, saws, and coating and welding equipment. It specializes in computer numerical control turning and milling with expertise in the oil and gas, refinery and petrochemical industries. In addition, the company maintains a research and development team that develops powder and techniques related to process development. Watson Grinding and Manufacturing has been operational for more than 45 years and maintains a location in Houston.
Houston / Texas / United States
0.0
Established in 1947, Houston Dynamic Service Inc. provides rotating equipment and repair services. The companys services includes into shop rotating and field rotating equipment services. Its shop offers equipment and services, such as pump/compressor/steam turbine repair and compressor, turbine seal strips and engine lathes. The firm serves markets that include oil and gas, production, refining, petrochemicals and power generation. Houston Dynamic Service Inc. rebuilds any original equipment manufacturer rotating machinery, including turbines, compressors, pumps, centrifuges and high-speed gear units.
Houston / Texas / United States
0.0
Wilson is a supplier of valve products, mill supplies, piping products, paper and janitorial products and safety products. Wilson is a division of Smith International. Smith International is a supplier of products and services to the oil and gas exploration and production industry and petrochemical industry. The company operates through several business units, including M-I SWACO, Smith Technologies, Smith Services and Wilson. The companys technology products and engineering services include drilling and completion fluid systems, waste management services, production chemicals, three-cone and fixed-cutter drill bits, turbines, fishing services, drilling tools, under-reamers, casing exit and multilateral systems, packers and liner hangers. The company also offers supply chain management solutions through a North American branch network that provides pipe, valve, fitting and safety products. Wilson is headquartered in Houston.
Houston / Texas / United States
0.0
Westfield Engineering & Services has been providing engineering, operating, detailed design, fabrication, and construction management services to the gas processing industry since the 1979. It provides services in areas, such as liquids recovery-dewpoint control, sulfur recovery, gas sweetening (H2S/CO2 Removal) and dehydration systems. The company offers a wide range of services, which includes process design, detailed design, fabrication, construction and many more. Located in Houston, Texas, Westfield Engineering & Services provides engineering, fabrication and construction management services to the gas processing industry. The company deals with the metals, such as teflon-lined metals, polypropylene-lined metals, fiberglass, plastics and glass-lined pipes and vessels.
Houston / Texas / United States
0.0
We are one of the oldest supply companys located in Houston Texas. Myoco has been in business for 40 years supplying the pipeline, petrochemical and industrial fields with pride. We pride ourselves with a knowledgeable sales staff and a large line of supplies to fit your every need. We offer a wide range of rental equipment from testing equipment to beveling machines to hand tools.
Houston / Texas / United States
0.0
Whitefield Plastics Corporation was founded in 1961 as the first, exclusive producer of castable polyurethane molding in Texas. Since its inception, the same family has owned and actively managed the company. Full Service Polyurethane Molding Our company is your single source for castable polyurethane molding. From one to 100, 000 pieces and parts weighing from one gram to 1, 000 lbs., versatility in molding is our trademark, and service is our motto. No job is too big or too small to be handled by Whitefield Plastics. Using state-of-the-art processing equipment and utilizing both simple and complex formulas, we create a wide range of products. Whether small or extremely large castings, all orders are handled using the same procedures that ensure accuracy, precision, and consistency.
Houston / Texas / United States
0.0
Formed in 1980, Gretna Machine Shop Inc. specializes in providing all the precision machine works. Based in Houston, Texas, the firm offers a range of services, such as swing, tool changer, spindle internal taper, max turning diameter, swing over saddle, main spindle drive motor and more. Gretna Machine shop Inc. provides choice for many high-end global petroleum corporations. Gretna Machine Shop Inc. is ISO certified and holds high scores through successful implementation of a management system.
Houston / Texas / United States
0.0
Established in 1939, Alloy Carbide Company is a custom manufacturer of precision industrial carbide components, designed specifically to resist wear and corrosion. The firm caters to its customers production needs through providing grinding/microfinishing, metal cutting/joining, quality assurance/inspection, spray coatings, pressure testing and forklift equipment. In addition, Alloy Carbide Company offers engineered coating, carbide/steel mated solutions and solid carbide plunger services to its customers. The firm s portfolio of products comprises hard trim for control valves, hyper-pressure thermocouples for LDPE, plungers/cylinder liners and other custom carbide components.
Houston / Texas / United States
0.0
The Burgess Bait Aerator was developed using technology from the oil industry. Drilling rigs use degassers to separate and remove gasses from mud. Burgess Manufacturing, Inc has been a leader in manufacturing these degassers for 35 years. What Burgess tried was reversing the principles that make their degassers work. Instead of extracting oxygen gasses, they added oxygen to the water. The biggest difference between Burgess Bait Aerator and other aerators is low amperage and low current which is achieved using the technology Burgess developed. It didnt happen over night. It took 8 years to achieve the successful design. Bait SystemsBurgess Marine Products offer Bait Systems to meet your personal requirements:youre fishing from a boat, on a beach or off a pier Burgess Marine Pro will provide you with the Bait Aeration System that will keep your bait catch alive.Burgess Advantage RevolutionaryThe revolutionary Burgess Bait Aerator is available in two sizes. The Guides Pro, using only 1/2 AMP is for the everyday fisherman, professionals, guides and anyone else that might use a small container or one as big as ninety quarts. The Offshore Pro draws 1 AMP and is for use on larger fishing boats, shrimpers, transports or any large commercial application. In an emergency, it can be used as a bilge pump. The Guides Pro discharges 7.5 gallons of water per minute and the Offshore Pro discharges 21 gallons per minute. The pump impellers unique patented process thoroughly mixes air into the water while operating at allow amperage. This process will not heat the water and does not create a strong water current. It also allows your battery to last 3 to 5 times longer. The patented design is non-clogging and has no filters to clean. It floats for maximum efficiency and the twist-lok action provides easy access inside.Harry Burgess says the response to his aerator has been overwhelming. Everyone that has tried it has reported a positive experience. One fisherman tells that he successfully used the Guides Pro to haul 42 live bass, averaging one pound each, from Tennessee to Houston in a 100 quart container. Once youve tried the Burgess Bait Aerator, youll never need another. And theres still more to come from Burges Marine Products, Inc Youll soon see a totally self-contained aeration system for fishing boats which includes a holding tank. You can purchase a Burgess Bait Aerator at sporting goods and fishing/tackle stores. If you are a product representative, a distributor or retailer, contact Burgess Marine Products.
Houston / Texas / United States
0.0
Established in 1958 and incorporated in the State of Texas in 1973, WOOD GEORGE & CO. is a manufacturer of production and drilling equipment. The firm manufactures API blind, swivel, weldneck, threaded companion flanges, flanged/hub connection pressure control equipment, clamps, studded crosses, tees, spools, double studded adapters and many more. It performs inspection and load test of oilfield elevators for tubing, drill pipe and casing. WOOD GEORGE & CO. is associated with AWHEM (Association of Well Head Equipment Manufacturers), National Association of Manufacturers and the U.S. Chamber of Commerce. The company acquired American Petroleum Institute (API) Monogram license in 1978.
Houston / Texas / United States
0.0
Weatherford International is one of the world s largest diversified upstream oilfield service companies. With a corporate history that began in 1941, Weatherford has nearly $4.6 billion in annual revenues, approximately 24,500 employees in nearly 100 countries and more than 85 manufacturing facilities supporting 730 service bases. In 2005, Standard & Poor s announced the addition of the company to its flagship S&P Index. Following the completion of its 2005 acquisition of Precision Drilling Corporations energy services and international drilling divisions, Weatherford was reorganized into four distinct businesses that include completion and production systems; evaluation, drilling and intervention; pipeline and specialty services; and international contract drilling. The company provides a variety of services to its customers that include drilling, evaluation, completion, production, intervention and industrial services. Weatherford International has locations throughout the United States, such as the office in Houston.
Houston / Texas / United States
0.0
Operational since 1967, General Plastics & Composites has been manufacturing engineered components and turnkey products, such as composites, elastomers and/or metal for oilfield service companies worldwide. The firm offers an array of products under categories, including components, assemblies, fixtures and specialty. Its capabilities include specialized laminate configurations, resin transfer molding, vacuum impregnation, wet lay-up, CNC (computer numerical control) and manual machining. The firm provides services, comprising of engineering, quality assurance/control, stocking and shipping programs. General Plastics & Composites operates through its subsidiaries, GP Rubber, Express Boring and a metal machining division.
Houston / Texas / United States
0.0
Pipeco Services is a global provider of tubular goods and services for the oil industry. The company s products include threaded tubing, casing and drill pipe. Pipeco is also an authorized Grant-Prideco drill pipe distributor and authorized distributor for AtlasBradford/Grant-Prideco mill finished and locally threaded premium connections. The company was established in 1982 and has headquarters in Houston. It also has sales offices in the Texas cities of Midland, Plano and San Antonio.
Houston / Texas / United States
0.0
Control Flow supplies valves and parts, heat compensators and pipe laying equipments to oil exploration companies. The company provides field installation, commissioning, equipment surveying and repair services for its products. Control Flow s manufacturing facility offers design, in-house testing and training services. Its equipment includes hydraulic and manual blow out preventers, Christmas trees, work over and drilling accumulators, choke control panels, and custom choke and kill manifolds, as well as flanges, crosses, tees, studded adapters and diverter spools. The company s wellhead equipment includes hangers, slips, test plugs and retrieval tools. Control Flow s products are available through its U.S. district sales offices, service centers and regional warehouses.
Houston / Texas / United States
0.0
When one hears the phrase inflatable casing annulus packers, a variety of mental images flood the brain. TAM International manufactures these packers, which are actually used in applications where a seal is required between casing and open hole or previous casing string. The company manufactures and services a wide variety of inflatable casing annulus packers and accessories. TAM International offers products and services that enable zone isolation of downhole conditions and operational requirements. Packer applications include drilling, completion and workovers operations. A partial list of products from TAM International includes casing annulus, element selection, bridge plugs, thru-tubing, electric line, slick line, single set, casing circulating, hydrological and geotechnical, port collars and scab liners. TAM International will also design, verify and manufacture custom orders. Headquartered in Houston, TAM International also has offices in Canada, Mexico, South America, Asia and Pacific, the Middle East, Africa, Australia and Europe.