Valves Manufacturers in United States

Dublin / California / United States

0.0

Tempresco is a supplier of valves, fittings and controls. The company distributes a large number of brands to suit contractors' needs. Contact the sales department for more information to order.

Detail

Jomar Group, Warren

Warren / Michigan / United States

0.0

Valves Manufacturers

Detail

Higgins Supply Inc, Houston

Houston / Texas / United States

0.0

Valves Manufacturers

Higgins Supply is a stocking distributor of piping products servicing the oil and gas industry and has been selling to both the domestic and international markets for over two decades. We maintain a 15, 000 sq. foot warehouse in Houston, Texas. Higgins Supply is large enough to supply all your industry needs, but small enough to provide you with the fast personal service you deserve. Call, e-mail, or fax us for same day quote in most cases. Browse our products.

Detail

Curtiss-Wright Flow Control Corporation photos

Curtiss-Wright Flow Control Corporation, Farmingdale

Farmingdale / New York / United States

0.0

Established in 1951, Curtiss-Wright Flow Control business units design and manufacture highly engineered valves, pumps electronics and related products for the United State s military, the nuclear power industry as well as for oil and gas processing facilities throughout the world. Its high-performance products can be found internationally on nearly every nuclear submarine and aircraft carrier commissioned by the U.S. Navy. The company maintains its headquarters in Falls Church, Va. With more than 2,000 employees worldwide, the company is an operating segment of the Curtiss-Wright Corporation. The company maintains an operation in Farmingdale, N.Y.

Detail

I Q Valves, Melbourne

Melbourne / Florida / United States

0.0

Incorporated in 2005, iQ Valves Co is a spin-off business entity after the corporate restructuring of Teknocraft, inc., founded in 1983. In less than five years, iQ Valves Co, has established itself as a leader in proportional valve technology, and has quickly expanded its business operating in facilities totaling 22, 000 square feet in Melbourne, Florida. With expertise in designing advanced Fluid Control and Fluid Power products spanning over 20 years, iQ Valves has retained its status as one of the fastest growing businesses in Central Florida. Our highly qualified Engineering Department provides comprehensive engineering services from conceptual design and prototyping through hardware production. The Assembly and Test Departments utilize the latest technological equipment and sophisticated data acquisition systems. iQ Valves product offering includes both custom designed and off the shelf valving and vacuum products. On the vacuum side, we offer venturi generators, vacuum switches and integrated venturi vacuums, as well as standard and check - valve vacuum cups.

Detail

Groth Corp, Stafford

Stafford / Texas / United States

0.0

Valves Manufacturers

Groth Corporation manufactures pressure and vacuum relief valves, flame and detonation arresters, tank top appurtenances, test stands, digester cover and gas control equipment, blanket gas regulators and other low pressure relief products. It also provides waste gas burners, pressure regulators, sediment and flame traps, check valves and drip traps. The company serves the chemical, oil and gas, biogas processing, pharmaceutical, and food and beverage industries. Established in 1960, Groth Corporation is a member of the Valve Manufacturers Association. It serves various refineries, chemical processing plants, and atmospheric and fixed-roof storage tank facilities. Groth Corporation is located in Stafford, Texas.

Detail

Freemire & Associates, Harmans

Harmans / Maryland / United States

0.0

Freemire & Associates is an engineering based sales firm calling on all customers from engineering to construction. All engineering houses, OEMs and end users are thoroughly covered by both our sales and service personal. Freemire & Associates was incorporated in the state of Maryland in 1953. The founder, Mr. Elmer Freemire owned and directed operation of the company until 1978 when Mr. Roy Freemire purchased the company and became its President and Director of Operations. With the help of twenty hard working employees Freemire & Associates has never been in a stronger position for the water and wastewater markets. In October 1998 Freemire & Associates moved from Columbia Maryland after 20 years to our new 16, 830 sq. ft. home in Harmans Maryland pictured above.

Amenities

Accepts Credit Cards

Detail

Pneumatic Control Inc, Bakersfield

Bakersfield / California / United States

0.0

Formed in 1975, Pneumatic Control Inc. is a manufacturer and wholesaler of valves. Based in Bakersfield, Calif., it offers products, such as ball valves, butterfly valves, control valves, measurement instruments, safety relief valves as well as flow sensors, temperature regulators and actuators. The company provides a wide range of services, including automation and controls maintenance of valves; and diagnostics and repair of control valve/automated valves. Pneumatic Control Inc. serves various industries including, petro chemical, oil and gas production and food processing/water treatment.

Detail

Flowserve PMV, Houston

Houston / Texas / United States

0.0

Flowserve PMV is among the leading manufacturers of valve positioners and accessories. The company s equipment can be mounted on a wide range of valve and actuator packages. Its product line includes pneumatic, electropneumatic, anti-vibration and digital models. Flowserve DMV supplies feedback units, limit switches and mounting kits. The company features HART, Profibus and Foundation fieldbus products. It also develops specialty housings fabricated from stainless steel and Tufram. Flowserve PMV is a subsidiary of Flowserve Corporation, a fluid motion and control products company. It serves the power, pulp and paper, water resources, pharmaceutical, pipeline, chemical, mineral and ore, petroleum, nuclear and general industry markets. Flowserve PMV s primary manufacturing facility is located in The Woodlands, Texas.

Detail

Oceco, Tiffin

Tiffin / Ohio / United States

0.0

OCECO was the first supplier of a complete line of venting and tank fitting equipment. The name "OCECO" is an abbreviation for Oil Conservation Engineering COmpany, which started in Cleveland, Ohio in the year 1921. Shortly thereafter, the Johnston and Jennings Company bought out OCECO. After the Second World War, the Pettibone Corporation purchased the Johnston and Jennings Company as part of their expansion program. For a while, Pettibone referred to this new line as the Johnston and Jennings Company, Division of Pettibone. Then, sometime later, Pettibone stopped using the name Johnston and Jennings and called the line the OCECO Division. In June of 1986, the OCECO Division was purchased from Pettibone Corporation by a group of employees, which brings us to our present condition. Our company name is now OCECO Incorporated and we are located in Tiffin, Ohio. OCECO was the first to develop a double disc water draw off valve and a pressure balanced membrane seated vent valve. Both valves were developed to prevent freezing up along with their normal functions. OCECOs modular vent valves are the most versatile, high performance valves on the market today. OCECO offers a wide range of equipment and the best way to find out about them is to look through our catalog. We believe that through our experience and careful workmanship, we manufacture the best products available.

Detail

Specialty & Ball Valve Engineering photos

Specialty & Ball Valve Engineering, Tustin

Tustin / California / United States

0.0

Our valves are produced to some of the most exacting quality standards in the industry. In addition to the Dynaflow manual valve line, SBVE can supply a variety of pneumatic, electro-mechanical, electro-magnetic or hydraulic actuators. Because our valves are designed with low friction trunnion bearings, actuator torque requirements are quite low. This helps reduce size, weight and cost of actuated valves. Example, the half inch bore valve with 5000 psi line pressure requires a breakout torque of only 85 INCH-pounds. This is with Navy seat materials used for over 30 years. By substituting more modern materials, we can reduce breakout torque further. Working closely with your engineers we will continue to expand the applications of our custom valves. Specialty & Ball Valve Engineering is developing new applications for Dynaflow valves and building partnerships to develop new elastomers and actuators for even more capable products in the 21st century.

Detail

Coyle Supply, Granite City

Granite City / Illinois / United States

0.0

Amenities

Detail

Empire Automation Systems, Rochester

Rochester / New York / United States

0.0

Located in the city of Rochester, N.Y., Empire Automation Systems was founded in 1989 as a full line Numatics distributor. The company provides sales, technical support and engineering services to the automation field. With the addition of Numation electrical components, is now an electro-pneumatic distributor. Empire Automation Systems services Upstate New York and Northeastern Pennsylvania. As a exclusive authorized stocking Numatics distributor Empire Automation Systems provides its customers with air valves, poppet valves, miniature pneumatics, air cylinders, actuators; rodless cylinders, motion control, slides and grippers, air bellows, fittings, air preparation products and accessories; FRLs, filtration, dryers, flow controls, field bus systems and air logic systems.

Detail

Parker Fluid Control Division, New Britain

New Britain / Connecticut / United States

0.0

Parker-Hannifin Fluid Control, based in New Britain, Conn., is a branch of Parker Hannifin Corporation, with annual sales exceeding $6 billion, the worlds leading diversified manufacturer of motion and control technologies, providing systematic, precision-engineered solutions for a wide variety of commercial, mobile, industrial and aerospace markets. The companys products are vital to virtually everything that moves or requires control, including the manufacture and processing of raw materials, durable goods, infrastructure development and all forms of transport. Parker-Hannifin serves 1,200 markets, via 8,600 distributors, in more than 48 countries. The company has 254 plants with more than 50,000 employees.

Detail

Asco, Novi

Novi / Michigan / United States

0.0

Numatics Incorporated develops and manufactures pneumatic components designed for automated machinery used in a variety of industries. The company s products include air preparation components, valves, actuators, motion control equipment and miniature pneumatics. The company has a history of generating concepts and technological breakthroughs, dating back to the 1940s. With the introduction of billion cycle, lapped spool and sleeve valves in 1952, Numatics established its reputation for design. Numatics Incorporated maintains a location in Highland, Mich.

Detail

Onyx Valve, Riverton

Riverton / New Jersey / United States

0.0

Onyx Valve is a manufacturing and distribution company. It performs the manufacture of major pinch valve products and components. Additional products include pneumatic actuators, expansion joints, pressure isolator rings, electro-pneumatic positioners and electric controls.

Detail

Young & Franklin Inc, Liverpool

Liverpool / New York / United States

0.0

Young & Franklin is a manufacturer of turbine controls. For more than 50 years, clients such as GE Energy, Solar Gas Turbines and Pratt &Whitney have relied on Young & Franklin. The company s products have been used in more than 10,000 land-based gas turbines throughout the world, including nearly 15 IGCC projects. Young & Franklin s research and development has produced new electromechanical, electrohydrostatic and voice coil technologies. Young & Franklin is based in Liverpool, N.Y.

Detail

West Side Plumbing Supply Co Inc, Hillside

Hillside / New Jersey / United States

0.0

The professionals at West Side Plumbing are thoroughly knowledgeable about plumbing products. You are encouraged to stop by our store and discuss your specific requirements with our expert staff. Solid Tradition of Service We have served the New Jersey and New York Metropolitan area for more than 80 years. We are a solid part of our communitys foundation, and our reputation is built on the trust of our customers.

Detail

Aunspach Controls Company, High Ridge

High Ridge / Missouri / United States

0.0

Aunspach Controls Company provides overtorque protection services for equipment such as actuators, dampers and valves. The company was founded by Dale Aunspach.

Detail

Syracuse Stamping Co

Syracuse / New York / United States

0.0

The Syracuse Stamping Company, founded in 1908, manufactures garage door hardware, gate faucets and inked ribbon spools. Operational for more than 75 years, it is a supplier of a range of hardware products, such as door rollers, hinges, pulleys and forks. The company also produces bearings, clips, handles, operator plates and rolling door hardware, as well as top and bottom brackets. It provides Manual and self-closing products and designs gate faucets for fast dispensing of nonflammable viscous liquids from storage containers. The Syracuse Stamping Company offers gate and molasses valves and drum and oil gates. Additionally, it provides metal, plastic and composite spools.

Detail