Filter Options
Required*
Filter

Physicians & Surgeons Equipment & Supplies Manufacturers in Minnesota

General Pattern Co Inc photos
General Pattern Co Inc, Minneapolis
Minneapolis / Minnesota / United States
0.0
General Pattern Company is a full-service provider of rapid prototyping, rapid tooling and rapid manufacturing for the automotive, medical, industrial and consumer products industries throughout the world. The company is a privately held, fourth generation, global company that was founded in 1922. It employs approximately 200 employees with a diverse array of technical and administrative capabilities. The company also designs and manufactures injection mold tools from component designs. General Pattern Company maintains its headquarters in Minneapolis, with additional engineering and manufacturing facilities in Ham Lake and Duluth, Minn., Detroit and London.
Detail
Urologix, LLC photos
Urologix, LLC, Minneapolis
Minneapolis / Minnesota / United States
0.0
Urologix is a Minneapolis-based company that develops, manufactures and markets medical devices for the treatment of urological disorders. Its technologies serve as treatment options for a wide range of patients with benign prostatic hyperplasia. Its patented Cooled ThermoTherapy is used to treat men with BPH. Cooled ThermoTherapy systems deliver precise microwave energy to heat and destroy enlarged prostate tissue while unique cooling mechanisms protect surrounding healthy, sensitive tissue. Urologix was founded in 1991 and trades on the NASDAQ under the symbol UGLX.
Detail
Hutchinson Technology Inc photos
Hutchinson Technology Inc
Hutchinson / Minnesota / United States
0.0
Hutchinson Technology designs and manufactures suspension assemblies for hard disk drives. Suspension assemblies are precise metal springs that hold a disk drive s recording head at microscopic distances above the drive s disks. They are critical to the operation of the disk drive. The company manufactures the majority of the worldwide supply of suspension assemblies for all sizes of disk drives produced by all of the major disk drive makers. In the disk drive industry, Hutchinson helps to dramatically lower the cost of data storage and improve the overall performance, reliability and manufacturability of disk drives. by continually delivering market-leading innovations in suspension assemblies. In health care, it has built upon expertise in near-infrared analysis technology to develop a bio-measurement device that allows real-time, non-invasive technology for measuring the oxygenation of local tissue. The company is based in Hutchinson, Minn.
Detail
Dotronix Technology Inc photos
Dotronix Technology Inc, Stillwater
Stillwater / Minnesota / United States
0.0
Dotronix Technologies designs and manufactures video display monitors and systems utilized by airports, medical device manufacturers, machined tool manufacturers, financial firms, equity trading floors, retail stores and fast food restaurants. The company s products include cathode ray tube, liquid crystal display, plasma and rear projection monitors, as well as touch screen displays and kiosks for its clients point-of-purchase advertising, digital video and signage needs. Dotronix has delivered more than 250,000 displays to the airline industry in such airports as McCarran International Airport in Las Vegas, Bob Hope Airport in Burbank, Calif., and Dulles International Airport near Washington D.C. In addition, The American Stock Exchange uses 1,000 Dotronix computer monitors on its trading floor. Dotronix Technologies is headquartered in New Brighton, Minn.
Detail
Patterson Companies, Inc photos
Patterson Companies, Inc, Saint Paul
Saint Paul / Minnesota / United States
0.0
Patterson Companies is a value-added distributor that serves the dental supply, veterinarian supply and rehabilitation supply markets. The company is comprised of several divisions. As Patterson s largest business, Patterson Dental provides a complete range of consumable dental products, and clinical and laboratory equipment, as well as value-added services to dentists, dental laboratories, institutions and other health care providers throughout North America. Patterson Dental has one of the largest direct sales forces in the industry, totaling nearly 1,300 sales representatives and equipment/software specialists serving the United States and Canada. Patterson Companies is publicly traded on the NASDAQ Stock Exchange under the symbol PDCO. The company is located in St. Paul, Minn.
Detail
Logic PD, Inc photos
Logic PD, Inc, Eden Prairie
Eden Prairie / Minnesota / United States
0.0
Logic, previously known as Micro Dynamics and Logic Product Development, is a product development and manufacturing company located in Minneapolis. The company serves the industrial, communications, computer, medical and aerospace markets. It specializes in design research and interaction design services. Logic provides product design services through its industrial design services division. Its engineering design services division provides product development solutions, such as product requirement gathering and analysis, prototyping and functional testing. The division provides mechanical, electrical, software and systems engineering services, including digital signal processor design and printed circuit board design and layout. The company s embedded products division is a supplier of development kits, system on modules and single-board computers. Logic also offers a range of manufacturing fulfillment services, including supply chain management, production, test and inspection, system integration and post manufacturing services. Logic s partners include Freescale, Marvell, NXP, Orion and Texas Instruments. The company also provides configurable Windows embedded solutions training to systems developers.
Detail
Minnesota Wire & Cable photos
Minnesota Wire & Cable, Saint Paul
Saint Paul / Minnesota / United States
0.0
Minnesota Wire & Cable designs and manufactures electrical interconnect solutions with rapid design-to-delivery of custom interconnect solutions. The company maintains a 30,000-square-foot headquarters in St. Paul, Minn., and a 30,000-square-foot production facility in Eau Claire, Wis. Minnesota Wire & Cable has more than 200 employees to provide services, such as in-house design, engineering and test lab services, which include rapid prototyping and complete tooling and extrusion. The company started as Wagner Consultants Corporation (WCC), a manufacturer s representative firm for general electronic components. After wire and cable products were added to its line in the 1970s, WCC was renamed Minnesota Wire & Cable in 1978. The company added molding machines, a tooling department and extrusion lines. Minnesota Wire & Cable has clients in industries, such as medical devices, defense contracting and telecommunications. Minnesota Bramstedt Surgical, a subsidiary of the company, repairs surgical instruments and is a United States distributor.
Detail
Ergotron photos
Ergotron, Saint Paul
Saint Paul / Minnesota / United States
0.0
Ergotron is derived from the words ergonomics and electronics . The company aims to improve the human interface with digital displays. Its products and digital display mounting solutions includes wall and desk mount arms, mobile carts, floor stands, desk stand, pivots and vertical lifts. Ergotron s products are designed to position computers where they re needed, provide ergonomic adjustability and save space. The company serves the healthcare, dental, pro AV, office, home, industrial, dispatch, financial and government markets. Established in 1982, Ergotron has headquarters in St. Paul, Minn., with five subsidiaries in Europe, one in Canada, and is represented in approximately 67 countries worldwide.
Detail
Vsamed Inc photos
Vsamed Inc, Eden Prairie
Eden Prairie / Minnesota / United States
0.0
Vasamed designs, licenses, manufactures and distributes a range of noninvasive hemodynamic products for cardiac and cardiovascular health. The company previously did business as Optical Sensors. Its Microvascular Assessment System monitors the health of small blood vessels. Vasamed s AcQtrac Impedance Cardiography monitors heart function. The company also features Tissue Carbon Dioxide Technologies for tissue wellness. Its SensiLase PAD 3000 is used for quantitative evaluation of small-vessel disease in patients with chronic foot ulcers, diabetes and other peripheral arterial disease. Vasamed distributes products through dealer representatives and independent contractors in the United States, Mexico, Germany, Turkey, Canada, Singapore and Japan. The company was established in 1988 and is based in Eden Prairie, Minn.
Detail
DDL photos
DDL, Eden Prairie
Eden Prairie / Minnesota / United States
0.0
Founded in 1990, DDL Inc. serves the medical device package, product and material testing industry. In September of 2007, the company merged with TCP Reliable, a New Jersey-based full-service manufacturer for temperature controlled packaging products and phase change materials. In addition to medical device package testing, its also offers product and material testing with a speciality in medical devices. The company has three ISO 9001:2008 facilities. Based in Eden Prairie, Minn., DDL Inc. s partners include TCP, Cryopak, Alternatives Technologie Pharma Inc. and Nexkemia. Its affiliated organizations include Medical Device Resources Group, ASTM, Institute of Packaging Professionals and International Safe Transit Association.
Detail
Medtronic photos
Medtronic, Minneapolis
Minneapolis / Minnesota / United States
0.0
Established in 1949, Medtronic is a medical technology company specializing in designing and manufacturing devices that alleviate pain, restore health and extend life. The company provides a range of products and therapies through its subsidiaries, Medtronic Cardiac Rhythm Management, Medtronic Cardiac Surgery, Medtronic Vascular, Medtronic Spinal and Navigation, Medtronic Neurological and Medtronic Diabetes. Medtronic Sofamor Danek provides an array of spinal devices and therapies, such as bone graft cages and devices, microdiscectomy systems for herniated discs and spinal systems that allow for minimally invasive surgeries. Arthur D. Collins Jr. has been the chief executive officer of Medtronic for more than five years. He has been with the health care equipment and services company for over 14 years. Collins Jr. earned a BS from Miami University of Ohio, and a MBA from the Wharton School, University of Pennsylvania. The company employs approximately 32,000 people worldwide. It is headquartered in Minneapolis and has locations in Memphis, Tenn.; Warsaw, Ind.; as well as Switzerland and Japan.
Detail
Activeaid, LLC photos
Activeaid, LLC, Redwood Falls
Redwood Falls / Minnesota / United States
0.0
ACTIVEAID is a company based in Redwood Falls, Minn. The company manufactures products for trauma, rehabilitation and electronic muscle simulation markets. The products offered are shower commode wheel chairs, bath chairs, tilt chairs and tables, bed rails, parallel bars, exercise apparatus and spineboards. The company customizes most of its chair designs for the customers. The company has been in operations for more than 40 years. The company has qualified dealers throughout the United States. It is a supporter of seminars on spinal cord injury.
Detail
Nonin Medical photos
Nonin Medical, Minneapolis
Minneapolis / Minnesota / United States
0.0
Operational for more than 20 years, Nonin Medical is a privately owned company that specializes in the design and manufacturing of medical devices and physiological monitoring solutions. It provides a variety of pulse oximeters, capnographs, sensors and related accessories. The company s capabilities include signal processing and sensor design. It distributes its branded products to various health and medical professionals in more than 125 countries. Nonin Medical develops fiber optic sensors for use in magnetic resonance imaging applications. It also offers small, lightweight and portable pulse oximeters for spot checking and continuous monitoring applications. The company provides products under the Flightstat and Sportstat brands. It has received ISO 13485:2003 certification
Detail
Tens Accessories photos
Tens Accessories, Minneapolis
Minneapolis / Minnesota / United States
0.0
Welcome to Tens Accessories Inc We are a 30 year old FDA, RoHS and ISO compliant facility offering our clients high quality cable assemblies at an affordable rate. Were with you every step of the way, committing ourselves in providing you with only the highest standards of products for your business needs. Dont know exactly what you need? From hand sketches, scale drawings or even sample cables, no project is to small or too large. Let our experience work for you. Give us a call, we would be happy to assist you with any project you have.
Amenities
Detail
3M Company photos
3M Company, Saint Paul
Saint Paul / Minnesota / United States
0.0
With companies located in more than 60 countries and worldwide sales reaching beyond $20 billion, 3M products are sold in more than 200 countries. A diversified technology company, 3M has a worldwide presence in the consumer and office; display and graphics; electro and communications; health care; industrial; safety, security and protection services; and transportation markets. The global enterprise utilizes intercompany cooperation in the research, manufacturing and marketing of its products. Its brands include Post-it, Scotch, Littmann, Nexcare First Aid and Filtrete. Tape, bandages, carpet cleaners, mounting products and air filters are some of the products the company manufactures. The corporate headquarters are located in St. Paul, Minn.
Detail
Kurt Manufacturing photos
Kurt Manufacturing, Minneapolis
Minneapolis / Minnesota / United States
0.0
Founded in 1946, Kurt Manufacturing specializes in computer numerical control precision machining, gearing and assembly solutions. The company is one of the leading manufacturers of close tolerance parts and assemblies in the United States. It offers a range of aluminum die casting, screw machining and assembly services. The company provides a variety of gazing, automation and gearing solutions. It owns and operates Kurt Hydraulics, which provides braided, metric, reusable and spiral hose couplings. The company offers vises and industrial compactors. It serves customers in the semiconductor, aerospace, automobile, oil and defense industries. Kurt Manufacturing s customers include IBM, Trane and Polaris.
Detail
Graco Inc photos
Graco Inc, Minneapolis
Minneapolis / Minnesota / United States
0.0
Graco provides systems, products and technology that set production standards in a range of fluid handling applications that include spray finishing and paint circulation, lubrication, sealant and adhesives and processing, as well as power application equipment for the contractor industry. Established in 1926, Graco s ongoing investment in fluid management and control will continue to provide solutions to a diverse worldwide market. The company s business divisions include the contractor equipment division that offers a line of products specifically designed for the professional painting contractor; the industrial equipment division that provides fluid handling equipment for a variety of spray finishing, chemical transfer, sealant, adhesives, lubrication and proportioning applications; and the lubrication equipment division that manufactures products used to dispense, meter and transfer motor and gear oils, grease, hydraulic and transmission fluids, antifreeze and specialty lubricants. Graco has a location in Minneapolis.
Detail
Minnetronix photos
Minnetronix, Saint Paul
Saint Paul / Minnesota / United States
0.0
Founded in 1996, Minnetronix is involved in the design and manufacture of software products and electronic items for various medical device companies. It also develops and builds a range of medical products for customers across the United States. The company specializes in the design of cardiovascular and therapeutic devices, point-of-care diagnostic instruments and monitoring equipment. It maintains a more than 40,000-square-foot facility. Minnetronix is a member of the Medical Device Manufacturers Association and LifeScience Alley. It has achieved ISO 13485:2003 certification. The company employs a work force of more than 135 people. Its clients include the Cleveland Clinic Foundation, Cyberkinetics Neurotechnology Systems, Millennium Medical Technologies, and neuroVASx.
Detail
Iacalhene Inc photos
Iacalhene Inc, Rush City
Rush City / Minnesota / United States
0.0
La Calh ne markets, designs, fabricates, installs and services standard and custom equipment to protect its customers products from contamination by the external environment or to protect its customers facilities and personnel from potentially dangerous products. The company was founded in the mid-1960s when it did containment work in the nuclear industry. It has since evolved to offer products in the health care, electronics and food and beverage industries as well. Some of these products include isolators, manipulators, transfer devices and packaging. La Calhene was established in France and maintains facilities in the United States and the United Kingdom. Its office in Rush City, Minn., markets products to North America and South America.
Detail
Bergquist Company photos
Bergquist Company, Chanhassen
Chanhassen / Minnesota / United States
0.0
Founded in 1964, The Bergquist Company is one of the leading developers and manufacturers of thermal management materials in the world. It supplies a range of user interface devices. The company serves several original equipment manufacturers in the automotive, computer, power supply, military and motor control industries. The Bergquist Company offers products under the Sil-Pad, Gap Pad, Bond-Ply and HeatSeal brands. It provides membrane switches, touch screens, and fans and blowers. The company also offers thermal substrates under the T-Clad brand. The Bergquist Company provides application engineering and research and development services. It operates manufacturing plants in Minnesota and Wisconsin.
Detail